Scaffolding

Scaffolding

Scaffolding is a temporary structure used in many workplaces as a walking or working surface for work crews to assist in maintenance, construction, and repair. When constructed and used properly, scaffolds provide a safe platform to complete work at heights and areas that would be otherwise difficult to reach. This safety topic is focused on the proper use of scaffolds and how to prevent potential falls, injuries or worse.

 Trainee wearing personal fall protection on scaffolding.

Trainee wearing personal fall protection on scaffolding.

Common hazards associated with scaffolds are:

  • Falls from elevation, due to lack of fall protection
  • Collapse of the scaffold, caused by instability or overloading
  • Being struck by falling tool or debris, due to lack of proper guardrails
  • Electrocution, due to the proximity of the scaffold to overhead power lines
  • Unsecured planking, that may cause slips or falls
  • Untrained personnel, or lack of a competent person on site when scaffolding is in use

OSHA General Industry Standard 1910.28(b)(12)(i) states the employer must ensure each employee on a scaffold is protected from falling in accordance 29 CFR part 1926, subpart L.

Guardrails must be used if performing work on scaffolding at heights of 10 feet or more to prevent falls.

Guardrails consist of 3 components:

  1. Top Rail: 38”- 45” from the platform surface
  2. Mid Rail: midway between top rail and the platform surface
  3. Toeboard: 3 ½” high and secured to the platform surface

OSHA General Industry Standard 1926.451(g)(1) states each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level.

While working at heights of 10 feet or more on scaffolding, employees must wear personal fall protection, such as a body harness, and/or ensure a guardrail is in place.

Personal fall protection shall:

  • be inspected prior to use
  • not be attached to a guardrail system
  • not be attached to hoisting equipment unless the system prevents the employee from walking off the work surface

OSHA General Industry Standard 1926.451(g)(1)(i) states each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold shall be protected by a personal fall arrest system.

 Worker wearing personal fall protection on boatswain chair.

Worker wearing personal fall protection on boatswain chair.

In addition to ensuring there is proper fall protection, here are more safety tips that should be followed when working on scaffolding to prevent falls:

  • Employees shall not climb cross braces or end frames, unless end frames are designed to be climbed.
  • An access ladder, stair tower or equivalent safe access shall be provided for all scaffolding.
  • Do not use ladders or makeshift devices on top of scaffolds to increase height.
  • Employees are prohibited from working on scaffolds covered with snow, ice, or other slippery materials, except to remove these substances.
  • Do not jump on planks or platforms.
  • Do not work on scaffolds during high winds.
  • Do not load a scaffold in excess of its rated working load.
  • Do not move any scaffold while employees are on them.
  • Do not mix scaffold components or force pieces to fit together when building the scaffold. This can severely compromise the strength of the scaffolding system.
  • Lock casters and wheels when scaffold is in place.
 Do not use random objects on top of scaffolds to increase height! This is very dangerous!

Do not use random objects on top of scaffolds to increase height! This is very dangerous!

More important reminders when working on or near scaffolding in the workplace:

  • All employees who erect, handle use, inspect, clean or dismantle scaffolding must be trained by a competent person. All users must be trained to spot and report hazards.
  • Scaffolds and all components shall be inspected by a competent person before each work shift, after changing weather conditions, or after prolonged work interruptions.
  • Use only the safe means of access on any scaffolding.
  • Immediately repair replace any portion of the scaffolding that is found to be damaged.
  • Scaffold planks should extend over end supports not less than 6-inches or more than 18-inches.
  • Do not let loose materials, tools or debris accumulate on any scaffold.
  • Areas below scaffold work should be barricaded unless a protective canopy is installed.
  • Be aware of overhead power lines in your work area. Most overhead power lines are not insulated and a safe distance will need to be maintained between the power line and the scaffolding.

If you are ready to do more for your workplace safety and health program, adding regular safety meetings or toolbox talks is guaranteed to improve workplace safety while improving productivity and your company’s bottom line at the same time.

Putting together the safety message, toolbox talk or safety meeting topic takes time and the free online resources that provide a safety topic outline to follow just aren’t good enough. Weeklysafety.com can make this part of your job easier and it’s super simple to get started.

A membership to Weeklysafety.com comes at a very low price that never goes up no matter how many employees you have and no matter how many awesome safety topics you use. You don’t need any fancy software, employees don’t need to download an app, and it's very easy to get started. Included in your membership are hundreds of safety topics that you can use for your safety meetings, toolbox talks and safety moments including a safety meeting topic like this one that covers Scaffolding Safety in the workplace.

Take a look at our website to learn more about everything that comes with a Weeklysafety.com membership and see all the information on pricing options. Click below to learn more today!

National Burn Awareness Week 2018 #NBAW2018

National Burn Awareness Week 2018 #NBAW2018

Hazard Reporting

Hazard Reporting

0